Ipé Deck Boards 2x2-8'

Double click on above image to view full picture

Zoom Out
Zoom In

Ipé Deck Boards 2x2-8'

Ipé Deck BoardsIpe (Tabebuia Serritofolia)

1x material can span 16”o.c.

5/4x material can span 24"o.c.

 Premium All Heart Grade.

 Ipe will weather to a soft, silver patina if left in its natural state. Should you wish to retain the walnut color, apply an oil-based UV inhibitor product. We recommend Messmer’s U.V. Plus for Hardwood Decks. Messmer’s will need to be re-applied annually.

 Pre-drill pilot holes close to the actual standard screw diameter to prevent splitting. Trim-head screws require a pilot hole slightly larger than the diameter of the screw head to permit countersinking. Stainless steel fasteners are recommended. We suggest the Swaneze (Simpson #7x2 ¼” #316 Stainless Steel) trim head screw.

 Anchorseal wax sealer should be applied to all end grain surfaces as soon as possible after cutting or trimming to prevent end splitting.

 If a hidden deck fastener is desired, we recommend the EB-TY Brand Hidden Deck Fastener. Ipe should be installed a minimum of 24” off the ground and have open cross ventilation on three sides. 1/8” gap between deck boards is recommended to allow air circulation. Deck boards may shrink as the wood becomes fully seasoned. The average rate of shrinkage is approximately 1/16” on 4” wide boards, and 1/8” on 6” wide boards. In hot dry conditions, the shrinkage may exceed this amount.

2" x 2" x 8'
Order # 024069

Call for Price


Ipé Deck Boards

Additional Information

Series No
Dimensions 2" x 2" x 8'
Manufacturer No
Material ipe

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.