Simpson® Composite Plastic Standoff | CPS7

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Simpson® Composite Plastic Standoff | CPS7

Mfg. No CPS7


  • Post bases prevent water damage

  • Attach to post before installation using four nail holes

  • Embed minimum 1/2” diameter rod into concrete and extend into wood member

8 x 8 (7 1/4" x 7 1/4")
Order # 213177

Call for Price
 

Details

The PBV is a hidden standoff post base. Two different sizes fit a variety of posts shapes.

Material: 14 gauge galvanized steel

Finish: Textured powder-coated flat black paint or galvanized

Order:
For powder-coated flat black, order PBV6PC or PBV10PC.
For galvanized coating order PBV6 or PBV10.
For kit containing Simpson Strong-Tie® Strong-Drive® SDS screws, RFB bolt, SET 1.7 adhesive, and powder coated PBV, order PBV6KT or PBV10KT.

The CPS is a Composite Plastic Standoff designed for increased concrete surface area.

Material: Engineered composite plastic

Installation: PBV and CPS

Post:
  • Drill a 3/4" diameter hole, 10" into the center of the post.
  • Clean out dust. Fill hole halfway with Simpson Strong-Tie® SET Epoxy-Tie® adhesive.
  • Insert all-thread rod and allow epoxy to set and cure.
  • Secure standoff to post using four 10d nails except PBV which uses four Simpson Strong-Tie SDS screws.
Concrete:
  • Drill a 3/4" diameter hole per anchor design (see footnote 2 below).
  • Clean out dust. Fill hole halfway with Simpson Strong-Tie SET Epoxy-Tie adhesive. Insert post subassembly into hole and allow epoxy to set and cure.
  • Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).

Additional Information

Series No
Dimensions 8 x 8 (7 1/4" x 7 1/4")
Manufacturer No
Material No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.